NC2164GPE is 20-port PoE unmanaged switch series that supports up to 16*10/100M PoE ports,
2*10/100/1000M ports and 2*1000M SFP ports. 16*10/100M ports support PoE+, conforming to IEEE 802.3af/at standard ,
single port PoE power up to 30W. It provides three modes, Extend, Default and VLAN, to adapt to various complex environments.
At the same time, support PoE Auto-check function, which is specially designed to solve the problems of equipment frozen.
It can automatically detect the frozen PD equipment and restart the ports’ output of PSE, and restart the PD device. It greatly reduces the maintenance difficulty of engineering .
It has a high anti-interference ability, the product supports 6KV surge protection, and 6KV contact / 8KV air ESD protection.
It supports wall hanging and desktop installation, reliable and durable, and can be used in security network video monitoring, network engineering and other occasions .
This switch includes the NC2164GPE-300 ( 300W built-in power supply, 270W PoE output ) ; NC2164GPE-200( 200W built-in power supply, 190W PoE output )
With 16*10/100M PoE ports, 2*10/100/1000M ports and 2*1000M SFP ports;
The maximum PoE power of single port is 30W;
It provides three modes of Extend, Default and VLAN to adapt to various complex environments;
Supports PoE Auto-check function, which is specially designed to solve the problems of equipment frozen.
It can automatically detect the frozen PD equipment and restart the ports’ output of PSE,
and restart the PD device. It greatly reduces the maintenance difficulty of engineering ;
Supports PoE power indication, convenient to display PoE power consumption;
Supports 6KV lightning protection, 6KV contact / 8KV air ESD protection.
Supports wall hanging and desktop placement.
Mains power supply，AC100~240V，50/60Hz
Ports1~16: 10/100Base-TX 30W PoE RJ45(IEEE802.3af/at PSE)
17~18 ports: 10/100/1000 Base-TX
19~20 ports: 1000Base-X SFP slots
If detect the frozen PD device, restart it
Extend mode: ports 1～16Extend up to 250m; 1～16 ports are isolated from each other and can only communicate with the uplink ports; restrain the network storm; turn off the flow control.
Default mode: normal switch mode.
VLAN mode: ports1~16 are isolated from each other and can only communicate with the
uplink port; restrain the network storm; turn off the flow control.
1~16 PoE ports
IEEE802.3af/at，end-span, single port≤30W
Cable and distance
Use cat5e/6 100m max.(Extend mode max.250m)
IEEE802.3, IEEE802.3u, IEEE802.3z
MAC address table
Power: 1 *red ;
Uplink 17~20: RJ45green LED indicate Link/Act
Downlink1~16: RJ45 green LED indicate Link/Act，yellow LED indicate PoE
Surge: 6KV, standard: IEC61000-4-5 ESD：6KV contact 8KV: air, standardIEC61000-4-2
420 mm×285 mm×44mm