The NPBM04 is a software platform controller, to be used in the smart surveillance box.
It can be connected with network switch, IP camera, flash lamp, alarm lamp, infrared detector or other equipment.
It can managed all connected equipment and with rich management function. Work with the plateform software,
It can send alarm message when input AC power off, device power off, optical fiber link down, IP camera link down...
Provide 1 channel AC power input, can detect input of voltage and current.
Provide 5 channels AC power supply output, can remote control and detect output of voltage and current.
provide 3 channel DC 12V, can remote control and detect output of voltage and current.
Support detecting box’s gate opening/closing status, can open door on remote side and alarm when unauthorized opening the door.
Support system extensions,can extend AC high voltage unit and alarm unit
AC power IN
AC 100~240V, 50/60Hz, 10A
Backups DC power IN
DC12V 6A maximum,It can be used for backup power supply
DC5V-24V 6A max.For 2 V+ V-output
AC OUT 1-5
Controlled AC output 5 channels;
support for remote control of single channel;
support shows the single circuit voltage and the current value;
DC12V output 3 channels, 3A, green terminal slot;
Support for remote control of single channel;
Support shows the single circuit voltage and the current value;
DC5V-24V 6A max. For 2 V+ V-output;
show power input, SN, device IP, server IP, link-status, SPD(surge protection device) status, temperature and humidity
GPRS module (optional)
GPS module (optional)
DC12V OUT 1-3
The max DC12V 6A, support for remote control, current and voltage detection
Gate lamp signal
13*LED(power supply, network, fiber optic, system)
electronic control lock (support key door and remote control door)
260 mm×137 mm×75mm