The NPBX01 is a software platform controller, to be used in the smart surveillance box.
It can be connected with network switch, IP camera, flash lamp, alarm lamp, infrared detector or other equipment.
It can managed all connected equipment and with rich management function. Work with the platform software,
It can send alarm message when input AC power off, device power off, optical fiber link down, IP camera link down...
Provide 1 channel AC power input, can detect input of voltage and current.
Provide 3 channel AC power supply output, can remote control and detect output of voltage and current.
provide 3 channel DC 12V, can remote control and detect output of voltage and current.
Support detecting box’s door opening/closing status, can open door on remote side and alarm when unauthorized opening the door.
The box is waterproof (IP55) and antirus, suitable for outdoor use for a long time.
Support system extensions,can extend AC high voltage unit and alarm unit.
AC power IN
AC 100~240V, 50/60Hz, 10A
Controlled AC output 5 channels;
support for remote control of single channel;
support shows the single circuit voltage and the current value;
DC12V output 3 channels, 3A, green terminal slot;
Support for remote control of single channel;
show power input, SN, device IP, server IP, link-status, SPD(surge protection device) status, temperature and humidity
>5 seconds long press: restore factory setting
backup power switch
2ah, 3.7V, 3-section, provides power supply for the whole machine after AC input power failure, and sends AC power failure alarm
2 gigabit optical port, 8 100m electrical port, non network management, support all port connection status feedback to the platform
AC220V, nominal discharge current ≥ 10kA (8 / 20) μ S)
Maximum discharge current: ≥ 20KA (8 / 20) μ S)
2 channels, switch signal input
The first is door opening detection
One switch output
One LED lamp, open case lighting
16 * LED (12vdc4, AcIn, network, fan, open door)
10 / 100 Network port