The NC3082SGM-200 is a 10-port, full gigabit network switch that supports up to 8 *10/100/1000M ports and 2*1000M SFP ports.
It has 200W built-in power supply, support L2 management, such as QoS, VLAN, MSTP, Multi-brocast, ports management.
It has the characteristics of reliable work, good for engineering installation, strong and durable, high cost performance and so on.
It can be used in security network video monitoring system, network engineering and other occasions.
With 8 *10/100/1000M downlink ports and 2*1000M SFP ports, with L2 network management;
Support L2 management, such as QoS, VLAN, MSTP, Multi-brocast, ports management;
6KV surge protection, 6KV contact / 8KV air ESD protection;
Support working temperature -10℃~50℃.
Powered by AC power
Range of voltage
AC 100~240V, 50/60Hz
Ports 1~8 10/100/1000Base-T RJ45
Ports 9~101000Base-X SFP slots
Cable and distance
Use cat5e/6，100m max.(Extend mode max.250m)
IEEE802.3, IEEE802.3u, IEEE802.3z
MAC address table
Power: 1 *red ;
Downlink1~8: On RJ45 green LEDs indicate Link/Act
Uplink 9~10: green LEDs indicate Link/Act
Surge: 6KV, standard: IEC61000-4-5
ESD: 6KV: contact/8KV: air, standard:IEC61000-4-2
270 mm×180 mm×44mm