The NC3082SPGM-200 is a 10-port, full gigabit PoE network switch that supports up to 8 *10/100/1000M PoE ports and 2*1000M SFP ports. 8*10/100/1000M ports support PoE+,
conforming to IEEE 802.3af/at standard.Two of them support the 90W high-power PoE, and the other six support the 30W PoE.
It has 200W built-in power supply, support L2 management, such as QoS, VLAN, MSTP, Multi-brocast, ports management and PoE management .
It has the characteristics of reliable work, good for engineering installation, strong and durable, high cost performance and so on.
It can be used in security network video monitoring system, network engineering and other occasions.
With 8 *10/100/1000M PoE ports and 2*1000M SFP ports, with L2 network management;
Supports 2 ports PoE power each up to 90W, 6 port PoE power each up to 30W;
It has 200W built-in power supply,support L2 management, such as QoS, VLAN, MSTP, Multi-brocast, ports management and PoE management;
6KV surge protection, 6KV contact / 8KV air ESD protection;
Supports working temperature -10℃~50℃;
Supports wall mounting and desktop installation.
Powered by AC power
Range of voltage
AC 100~240V, 50/60Hz
Self consumption<20W, PoE output180W max.
Ports 1~2 10/100/1000Base-T 90W PoE RJ45(IEEE 802.3bt, also support IEEE8025.3af/at) ;
Ports 3~8 10/100/1000 Base-T 30W PoE RJ45(IEEE802.3af/at)
Ports 9~101000Base-X SFP slots
1-2 ports maximum 90W, 3-8 ports maximum 30W output
Cable and distance
Use cat5e/6，100m max.(Extend mode max.250m)
IEEE802.3, IEEE802.3u, IEEE802.3z
MAC address table
Power: 1 *red ;
Downlink1~8: On RJ45 green LEDs indicate Link/Act,yellow LEDs indicate PoE
Uplink 9~10: green LEDs indicate Link/Act
Surge: 6KV, standard: IEC61000-4-5 ESD: 6KV: contact/8KV: air, standard:IEC61000-4-2
270 mm×180 mm×44mm