NC2042PE is a 6-port PoE unmanaged switch that supports up to 4*10/100M PoE ports and 2*10/100M uplink ports.
4* 10/100M ports support PoE+, conforming to IEEE 802.3af/at standard, single port PoE power up to 30W, the maximum whole machine power is 60W.
NC2042PE provides three modes, Extend, Default and VLAN, to adapt to various complex environments.
At the same time, support PoE Auto-check function, which is specially designed to solve the problems of equipment frozen.
It can automatically detect the frozen PD equipment and restart the ports’ output of PSE, and restart the PD device. It greatly reduces the maintenance difficulty of engineering.
NC2042PE has a high anti-interference ability, the product supports 6KV surge protection,
and 6KV contact /8KV air ESD protection.
NC2042PE supports wall hanging and desktop installation, reliable and durable,
and can be used in security network video monitoring, network engineering and other occasions.
With 4*10/100M PoE downlink ports and 2*100M uplink ports.
The maximum PoE power of single port is 30W, and the maximum PoE power of the whole machine is 60W.
Provides three modes of Extend, Default and VLAN to adapt to various complex environments.
Supports PoE auto-check function, which is specially designed to solve the problems of equipment frozen.
It can automatically detect the frozen PD equipment and restart the ports’ output of PSE,
and restart the PD device. It greatly reduces the maintenance difficulty of engineering.
6KV surge protection, 6KV contact / 8KV air ESD protection.
Powered by power adaptor
Range of voltage
Self consumption<5W, PoE output max. 60W
Ports 1~4 10/100Base-TX 30W PoE RJ45(IEEE 802.3af/at)
Ports 5~6 10/100/1000Base-T RJ45
Ports 1~4 support IEEE802.3af/at, end-span, 30W per port Max.
If detect the frozen PD device, restart it
Extend mode: ports 1 ~ 4 Extend up to 250m;1 ~ 4 ports are isolated from each other and can only communicate with the uplink ports; restrain the network storm; turn off the flow control.
Default mode: normal switch mode.
VLAN mode: ports 1 ~ 4 are isolated from each other and can only communicate with the uplink port; restrain the network storm; turn off the flow control.
1~8 PoE ports
Support IEEE 802.3af/at, end-span, single port≦30W
Cable and distance
Use cat5e/6，100m max.(Extend mode max.250m)
IEEE802.3, IEEE802.3u, IEEE802.3z
MAC address table
Power: 1 *red ;
Uplink5, 6: On RJ45 yellow and green LEDs indicate Link/Act
Downlink 1~4: On RJ45 green LEDs indicate Link/Act, yellow LEDs indicate PoE
Surge: 6KV, standard: IEC61000-4-5 ESD: 6KV: contact 8KV: air, standard:IEC61000-4-2
135mm x 80mm x 30mm